|
Range
of types AF … / … W ..
Capacitors with 2 bushhings. Internal connection
: Single phase, Both poles are connected
through the bushings with the terminls.
Capacitor conainer has to be grounded.
|
|
| Technical
Data |
| Rated output |
100 kvar …
500 kvar |
| Rated voltage |
1,3 up to 13,85
kV |
| Rated frequency |
50 Hz (60 Hz on request) |
| Dielectric |
Polypropylene Film |
| Impregnant |
JARYLEC 101 Chlor - and PCB
- free |
| Losses |
0,15 W/kvar at +40°C ambient
air temperature and rated operation |
| Internal fuses |
Capacitord with and without
internal fuses available |
| Discharge resistor |
Standard design without discharge
resistor. On request with built - in discharge
resistor availbe.
te <= 10 min. |
|
| Operating
Conditions |
| |
|
| Maximum altitude |
1000m above sea
level at rated operation |
| Temperature class |
- 40°/C acc.
To IEC 871. Other temperature classes on request. |
| Admissible ambient air temperature
values |
| |
+ 40° C highest mean over
24 h |
| |
+ 30° C highest mean over
1 year |
| |
+ 50° C maximum |
| |
- 40° C minimum |
| Mounting: Indoor or outdoor
mounting |
|
| |
 |
| |
| Permissible
Overload |
| Current |
1,3 xIN
continuously |
| Voltage |
1,0 xUN continuously |
| |
1,1 xUN 12 h in every 24 h |
|
| |
|
|
Range
of types AF …/…E..
Capacitor with 1 bushing . Internal connection
: Single phase, one pole connected with
the capacitor container, the other pole
connected through the bushing with terminal.
The capacitor has to be installed on insulated
supports.
|
|
| |
| General
Data |
| Capacitor container |
Indoor mounting: Steel 1.0330,
DIN 1624 |
| |
Outdoor mounting: Stainless
steel 1.4512, DIN 17441 |
| Colour |
RAL 7032 |
| Rating plate |
Durable plastic type |
| Terminals |
M 16 |
| Earthing terminal |
M 12 |
| Bushings |
Porcelain |
Fixing brackets can be changed on request. |
|
| |
 |
| |
|
Standards
AEG shunt capacitors for a. c. systems having
a rated voltage over 1000 V comply with
VDE 0560, Teil 410 and IEC-publication 871.
Quality
Assurance
All capacitors are subject to the following
tests unless otherwise agreed between the
customer and the manufacturer:
|
|
| |
| -
Test voltage between the terminals |
| |
d. c. voltage 4,3
x UN,10 s or |
| |
a. c. voltage 2,15
x UN,10 s |
| - Test voltage
between terminals and container |
| |
(typ AF …/…
W .. only) |
| |
a. c. voltage acc.
To IEC 871, 10 s |
| - Capacitance measurement |
| - Capacitor loss
tangent (tan ) measurement |
|
|
